122 Chapter 5Faxing2 Display the Receive mode settings screen.(1) Use [ ] or [ ] to select , then press [OK].3 Select a receive mode.(1) Use [ ] or [ ] to select a receive mode, then press [OK].The receive mode will be displayed on the LCD. Canceling ReceivingPress [Stop/Reset] and follow any instructions on the LCD. Memory ReceivingIf ink has run low while receiving a fax, if the paper size setting is incorrect, or if the paper type isset to a type other than plain paper, the fax is automatically stored in memory and memory.> is displayed. When the ink tank is replaced or the paper size/type setting is corrected,the stored fax is printed automatically.NoteFor details on the receive modes, see “Receive Modes” on page 119.Notez The machine can store up to approximately 250 pages* of faxes in memory.z If the memory becomes full, the machine cannot receive any more faxes. Print or deletethe documents stored in memory, and then contact the sender and have him/her resendthem.* When using ITU-T No.1 chart (Standard mode)(1)
