Maintenance ProcedureIf print results are blurred, colors are not printed correctly, or print results are unsatisfactory (e.g. misalignedprinted ruled lines), perform the maintenance procedure below.Important• Do not rinse or wipe the print head and ink tank. This can cause trouble with the print head and inktank.Note• Make sure that the orange protective tape does not remain on the ink tank.• Open the operation panel and make sure that the lamp on the ink tank is lit. If the lamp is flashing or off,take appropriate action.Checking the Ink Status with the Ink Lamps• Increasing the print quality in the printer driver settings may improve the print result.Changing the Print Quality and Correcting Image DataWhen the Print Results Are Blurred or Uneven:Step1 Print the nozzle check pattern.From the machinePrinting the Nozzle Check PatternFrom the computerUse Your Computer to Print a Nozzle Check PatternStep2 Examine the nozzle check pattern.If there are missing lines or horizontal white streaks in the pattern:Step3 Clean the print head.From the machineCleaning the Print HeadFrom the computer193
