Inserting the Memory CardImportant• When a memory card is inserted into the card slot, the Access lamp is lit. When the Access lamp isflashing, the machine is accessing the memory card. In this case, do not touch the area around the cardslot.Note• When Read/write attribute is set to Writable from USB PC or Writable from LAN PC, you cannotprint image data from the memory card using the operation panel of the machine. After using the cardslot as the memory card drive of a computer, remove the memory card, select Device user settings inDevice settings, then set Read/write attribute to Not writable from PC.Setting Up the Card Slot as the Memory Card Drive of the Computer• When you use a computer to edit or enhance photos saved on a memory card, be sure to print themfrom the computer. If you use the operation panel, the photos may not be printed properly.1. Prepare your memory card.Attach a special card adapter if your memory card requires one.Before Inserting the Memory Card2. Turn on the power.3. Insert only one memory card into the card slot.The location to insert a memory card varies depending on each type of memory card. Insert yourmemory card straightforward WITH THE LABELED SIDE FACING UP into the card slot, according to theinsert location in the figure below.When the memory card is inserted properly, the Access lamp (A) will light up.Be sure to attach the card adapter for memory card with the mark (asterisk), and then insert it into thecard slot as shown below.Insert the following types of memory cards into the upper card slot:• Memory Stick Duo, Memory Stick PRO Duo• Memory Stick Micro (with the Duo size adapter)177
