Managing the Printer PowerThis function allows you to manage the printer power from the printer driver.The procedure for managing the printer power is as follows:Power OffThe Power Off function turns off the printer. When you use this function, you will not be able to turn theprinter on from the printer driver.1. Select Power Settings from the pop-up menu on the Canon IJ Printer Utility2. Execute power offClick Power Off, and when the confirmation message appears, click OK.The printer power switches off.Auto PowerAuto Power allows you to set Auto Power On and Auto Power Off.The Auto Power On function automatically turns on the printer when data is received.The Auto Power Off function automatically turns off the printer when there are no operations from theprinter driver or the printer for a specified period of time.1. Select Power Settings from the pop-up menu on the Canon IJ Printer Utility2. Check that the printer is on, and then click Auto PowerA dialog appears.Note• If the printer is off or if communication between the printer and the computer is disabled, anerror message may appear because the computer cannot collect the printer status.3. If necessary, complete the following settings:Auto Power OnSpecifying Enable from the list will turn the printer on upon receipt of print data.Auto Power OffSpecify the time from the list. When this time lapses without any operations from the printer driveror the printer, the printer is turned off automatically.4. Apply the settingsThe setting is enabled after this. When you want to disable this function, select Disable from the listaccording to the same procedure.226
