Canon IJ Network Tool MenusThis section describes the menus in Canon IJ Network Tool.1. Canon IJ Network Tool menuAbout Canon IJ Network ToolDisplays the version of this application.Quit Canon IJ Network ToolExits IJ Network Tool.2. View menuStatusDisplays the Status screen to confirm the printer connection status and wireless communicationstatus.In the access point mode, this item is grayed out and you cannot confirm the printer connectionstatus.RefreshUpdates and displays the contents of Printers: to the latest information.Important• To change the printer's network settings using IJ Network Tool, it must be connected via a LAN.• If the printer on a network is not detected, make sure that the printer is turned on, then selectRefresh. It may take several minutes to detect printers. If the printer is not yet detected, connect themachine and the computer with a USB cable, then select Refresh.• If the printer is being used from another computer, a screen is displayed informing you of thiscondition.Note• This item has the same function as Update in the Canon IJ Network Tool screen.Network InformationDisplays the Network Information screen to confirm the network settings of the printer.3. Settings menuConfiguration...Displays the Configuration screen to configure settings of the selected printer.Note• This item has the same function as Configuration... in the Canon IJ Network Tool screen.Maintenance...Displays the Maintenance screen to revert the network settings of the printer to factory default.274
