Cleaning the Print Heads from Your ComputerAfter cleaning the print head, print and examine the nozzle check pattern: Step1If the problem is not resolved after performing from step 1 to step 3 twice:Step4 Clean the print head deeply.From the machineCleaning the Print Head DeeplyFrom the computerCleaning the Print Heads from Your ComputerNote• When you have performed the procedure until step 4 and the problem has not been resolved, turn offthe power and clean the print head deeply again after 24 hours.If the problem is still not resolved, the print head may be damaged. Contact the service center.When the Print Results Are Not Even such as the Ruled Lines AreMisaligned:Step Align the print head.From the machineAligning the Print HeadFrom the computerAligning the Print Head Position from Your Computer194
