Scaling the Printing to Fit the Paper SizeThe procedure for printing a document that is automatically enlarged or reduced to fit the page size to beused is as follows:1. Check the paper sizeCheck that the Paper Size in the Print Dialog is the same as the paper size that you set in theapplication software.2. Select Paper Handling from the pop-up menu3. Set the print paper sizeCheck the Scale to fit paper size check box. Then from the Destination Paper Size pop-up menu,select the paper size that is actually loaded in the printer.4. If necessary, check the Scale down only check boxWhen you check this check box, the document will be reduced to fit to the paper size when thedocument size is larger than the page size. The document will be printed in the original size when thedocument size is smaller than the page size.5. Complete the setup333
