Canon GM2000 Series Online Manual

Also see for GM2000 Series: Getting started Getting started

Contents

Canon GM2000 Series Online Manual Manual pdf 82 page image

Loading Envelopes in Rear TrayYou can load Envelope DL and Envelope Com 10 on the rear tray.The address is automatically rotated and printed according to the envelope's direction by specifying with theprinter driver properly.Important• Do not use the following envelopes. They could jam in the printer or cause the printer to malfunction.• Envelopes with an embossed or treated surface• Envelopes with a double flap• Envelopes whose gummed flaps are already moistened and adhesive1. Prepare envelopes.• Press down on all four corners and edges of the envelopes to flatten them.• If the envelopes are curled, hold the opposite corners and gently twist them in the oppositedirection.• If the corner of the envelope flap is folded, flatten it.• Use a pen to press the leading edge in the inserting direction flat and sharpen the crease.The figures above show a side view of the leading edge of the envelope.Important• The envelopes may jam in the printer if they are not flat or the edges are not aligned. Make surethat no curl or puff exceeds 0.12 in. (3 mm).2. Open rear tray cover (A). Pull straight up and fold back paper support (B).82