Printer Does Not PrintCheck1 Make sure printer is turned on.If not, make sure the printer is securely plugged in and press ON button to turn on.The ON lamp flashes while the printer is initializing. Wait until the ON lamp stops flashing and remains lit.Note• If you are printing large data, printing may take longer to start. The ON lamp flashes while the computer isprocessing data and sending it to the printer. Wait until printing starts.Check2 Make sure printer is properly connected to computer.If you are using a USB cable, make sure it is securely connected to both the printer and the computer. When theUSB cable is securely plugged in, check the following:• If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to thecomputer, and retry the printing. If printing starts normally, there is a problem with the relay device. Contactthe vendor of the relay device.• There could also be a problem with the USB cable. Replace the USB cable and retry the printing.If you use the printer over a LAN, make sure the printer is correctly set up for network use.Cannot Find Printer while Using Wi-FiCannot Find Printer while Using Wired LANNote• Using IJ Network Device Setup Utility allows you to diagnose or repair network connection.Select the link below to download IJ Network Device Setup Utility and install it.Checking Printer Connection Status Using IJ Network Device Setup UtilitySee below for starting up IJ Network Device Setup Utility.Starting Up IJ Network Device Setup UtilityCheck3 If printing from a computer, delete unnecessary print jobs.Deleting the Undesired Print JobCheck4 Is your printer's printer driver selected when printing?The printer will not print properly if you are using a printer driver for a different printer.Make sure "Canon XXX series" (where "XXX" is your printer's name) is selected in the Print dialog box.283
