Transporting Your PrinterWhen relocating the printer for changing your living place or repairing it, make sure of the following.Important• You cannot take ink out of the ink tank.• Check if the tank cap is completely inserted. If the ink tank cover is not completely closed, insert thetank cap properly.• With the print head left installed in the printer, press the ON button to turn off the power. This allows theprinter to automatically cap the print head, thus preventing it from drying.• Do not remove the print head. Ink may leak.• If ink stains the inside of the printer, wipe them using a soft cloth dampened with water.• When transporting the printer, pack the printer in a plastic bag so that ink does not leak.• Pack the printer in a sturdy box so that it is placed with its bottom facing down, using sufficientprotective material to ensure safe transport.• Do not tilt the printer. Ink may leak.• When a shipping agent is handling transport of the printer, have its box marked "THIS SIDE UP" tokeep the printer with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE".• Please handle with care and ensure the box remains flat and NOT turned upside down or on its side, asthe printer may be damaged and ink in the printer may leak.1. Turn off printer.2. Check that ON lamp is off and unplug power cord.Important• Do not unplug the printer while the ON lamp is lit or flashing, as it may cause malfunction ordamage to the printer, making the printer unable to print.3. Open the top cover.127
