Reconfiguration Method of LAN Connection/ReconfigurationMethod of Wi-Fi ConnectionReconfiguration Method of LAN ConnectionReconfiguration Method of Wi-Fi ConnectionReconfiguration Method of LAN ConnectionFollow either procedure below to change LAN connection method (wired or Wi-Fi).• Redo setup using the Setup CD-ROM or from the web page.• Enable Wi-Fi or wired LAN on the operation panel of the printer. After that, perform settings on theNetwork Settings screen on IJ Network Device Setup Utility.For details, refer to Performing/Changing Wi-Fi Settings or Performing/Changing Wired LANConnection (Ethernet Cable) Settings.Reconfiguration Method of Wi-Fi ConnectionFollow either procedure below to change Wi-Fi connection method (infrastructure or Wireless Direct).• Redo setup using the Setup CD-ROM or from the web page.• Perform settings on the Network Settings screen on IJ Network Device Setup Utility.Important• Before you perform settings using IJ Network Device Setup Utility, turn on Easy wireless connectmode on the printer following the procedure below.1. Check that printer is turned on.2. Press and hold Wireless connect button for 3 seconds.3. Perform operations following instructions on your smartphone or tablet.4. If message saying setup is completed appears, make sure the Online lamp on theprinter is lit.47
