General NoticesChoosing a LocationRefer to "Specifications" in the Online manual for details on operating environment.• Do not install the printer in a location that is unstable or subject to excessive vibration.• Do not install the printer in locations that get very hot (direct sunlight, or close to a heating source),very humid or dusty locations, or outdoors.• Do not place the printer on a thick rug or carpet.• Do not place the printer flush against a wall.Power Supply• Keep the area around the power outlet clear at all times so you can easily unplug the power cord ifnecessary.• Never remove the plug by pulling on the cord.General Notices• Do not tilt the printer, stand it on end, or turn it upside down. This may cause ink to leak.• Do not place anything on top of the printer. Be especially careful to avoid metal objects such aspaper clips and staples, and containers holding flammable liquids such as alcohol or thinner.• Modifying or dismantling the print head or ink bottles, such as by putting holes in them, could causethe ink to leak out and cause a malfunction. We recommend that you do not modify or dismantlethem.• Do not put the print head or ink bottles into a fire.When using the optional FINE cartridge• Do not throw FINE cartridges in the fire.111
