Canon EOS M100 Help Manual

Also see for EOS M100: Getting started guide User manual

Contents

Canon EOS M100 Help Manual Manual pdf 81 page image

81IndexAppendixErrors and WarningsTroubleshootingSettingsPlaybackShootingSetup and BasicsLearning About the CameraAccessoriesWireless FeaturesWireless Features/AccessoriesFinding Images with the Front Dial● Use the front dial to find and jump between desired images quicklyaccording to your specified conditions. The following conditions (jumpmethods) can be specified.Displays images you have rated.Jumps to the first image in each group ofimages that were shot on the same date.Displays 1 image at a time.Jumps by 10 images at a time.Jumps by 100 images at a time.● After you have chosen a condition, turn the dial to view onlyimages matching the condition or jump by the specified number ofimages forward or back.● The conditions [ ], [ ], [ ], [ ], or [ ] are displayed only whensome images have these ratings. Similarly, [ ]/[ ] is displayed onlywhen images have been rated.● Use [ ] to jump between images with any rating.Protecting Images● To cancel protection, press the button to choose [ ], and thenchoose [ ], either by pressing the / buttons or turning thedial. [ ] is no longer displayed.● Protected images on a memory card will be erased if you format thecard.● Protected images cannot be erased using the camera’s erasurefunction. To erase them this way, first cancel protection.● You can also protect images by choosing MENU > [ 1] tab >[Protect].Protecting Multiple Images● To cancel protection (and remove [ ] display), when [ ] is displayed,press the button again.● Images are not protected if you switch to Shooting mode or turn thecamera off before saving your changes.● You can also select or clear images on the image selection screenby touching them. A confirmation message is displayed if youtouch [ ].● You can also protect images when [Accept changes?] is displayed bytouching [OK].Protecting a Range of Images● When selecting the last image, you cannot select an image before thefirst image.● To cancel protection for groups of images, choose [Unlock] on the[Select Range] screen.● You can also display the screen for choosing the first or last image bytouching an image on the [Select Range] screen.● You can also protect images by touching [Protect] on the [SelectRange] screen.Clearing All Protection at Once● You can clear protection from all images at once. Choose MENU >[ 1] tab > [Protect] > [Unprotect All Images]. Press the / buttonsto choose [OK].