Canon EOS M100 Help Manual

Also see for EOS M100: Getting started guide User manual

Contents

Canon EOS M100 Help Manual Manual pdf 28 page image

28IndexAppendixErrors and WarningsTroubleshootingSettingsPlaybackShootingSetup and BasicsLearning About the CameraAccessoriesWireless FeaturesWireless Features/Accessories3 Configure the settings.● Choose [GPS via Mobile], and then pressthe / buttons to choose [Enable].4 Shoot.● The still images and movies you shootare now geotagged using smartphoneGPS information, which you can check asdescribed in “Info Display 8” (= 99).● Next time, after starting Camera Connecton your smartphone, make sure thecamera and smartphone are connectedvia Bluetooth before shooting.● Images are not geotagged this way unless Camera Connect isrunning.● The GPS information added to your movie is acquired initially,when you start recording.● GPS information cannot be updated unless Wi-Fi is off.● The GPS information added to images in remote live viewshooting is acquired initially, when you switch to a Wi-Ficonnection.● Images may not be geotagged if you connect via NFC or Bluetoothwhen the camera is off.● Others may be able to locate or identify you by using location datain your geotagged still images or movies. Be careful when sharingthese images with others, as when posting images online wheremany others can view them.Using a Smartphone to View Camera Imagesand Control the CameraYou can do the following with the dedicated smartphone app CameraConnect.● Browse images on the camera and save them to the smartphone● Geotag images as you shoot (= 28)● Control the camera remotely from a smartphone (= 29)● Privacy settings must be configured in advance to allow imageviewing on the smartphone (= 12, = 30).Geotagging Images When You ShootStill images and movies you shoot can be geotagged using GPSinformation (such as latitude, longitude, and elevation) from a Bluetoothenabled smartphone. You can review the recorded GPS information onthe camera (= 99), and using the software (= 39), you can view thelocations on a map with the still images and movies next to them.1 Pair the camera and smartphone viaBluetooth (= 8).2 Choose [GPS settings].● Press the button, choose [GPSsettings] on the [ 4] tab, and then pressthe button.