Canon EOS M100 Help Manual

Also see for EOS M100: Getting started guide User manual

Contents

Canon EOS M100 Help Manual Manual pdf 22 page image

22IndexAppendixErrors and WarningsTroubleshootingSettingsPlaybackShootingSetup and BasicsLearning About the CameraAccessoriesWireless FeaturesWireless Features/AccessoriesSending Images to Another CameraConnect two cameras via Wi-Fi and send and receive images betweenthem as follows.● Only Wi-Fi compatible Canon cameras can be connected via Wi-Fi.You cannot connect to a Canon camera unless it is Wi-Fi compatible,even if it supports FlashAir/Eye-Fi cards.1 Access the Wi-Fi menu.● Press the button.2 Choose [ ].● Press the / / / buttons to choose[ ], and then press the button.3 Choose [Add a Device].● Press the / buttons to choose [Add aDevice], and then press the button.● Also follow steps 1 – 3 on the targetcamera.● Camera connection information will beadded when [Start connection on targetcamera] is displayed on both camerascreens.5 Choose the printer.● Press the / buttons to choose theprinter name, and then press thebutton.6 Choose an image to print.● Press the / buttons to choose animage.● Press the button, choose [ ], andpress the button again.● Press the / buttons to choose [Print],and then press the button.● For detailed printing instructions, see“Printing Images” (= 41).● To end the connection, press thebutton, press the / buttons onthe confirmation screen to choose [OK],and then press the button.● Connections require that a memory card with saved images be inthe camera.● Once you have connected to devices via the Wi-Fi menu, recentdestinations will be listed first when you access the menu. Youcan easily connect again by pressing the / buttons to choosethe device name and then pressing the button. To add a newdevice, display the device selection screen by pressing the /buttons, and then configure the setting.● If you prefer not to display recent target devices, choose MENU >[ 4] tab > [Wireless settings] > [Wi-Fi Settings] > [Target History]> [Off].● To use another access point, see “Using Another Access Point”(= 13).