6-31Windshield Washer FluidWhat to UseWhen you need windshield washer fluid, be sure to readthe manufacturer’s instructions before use. If you will beoperating your vehicle in an area where the temperaturemay fall below freezing, use a fluid that has sufficientprotection against freezing. See “Engine CompartmentOverview” in the Index for reservoir location.Adding Washer FluidYour vehicle has a low washer fluid message that comeson when the washer fluid is low. The message isdisplayed for 15 seconds at the start of each ignitioncycle. When the LOW WASHER FLUID message isdisplayed, you will need to add washer fluid to thewindshield washer fluid reservoir.The windshield washer fluidreservoir is located in theengine compartment towardthe front of the vehicle onthe driver’s side.Open the cap with the washer symbol on it. Add washerfluid until the tank is full.NOTICE: When using concentrated washer fluid,follow the manufacturer’s instructions foradding water. Don’t mix water with ready- to - use washerfluid. Water can cause the solution to freezeand damage your washer fluid tank andother parts of the washer system. Also,water doesn’t clean as well as washer fluid. Fill your washer fluid tank onlythree- quarters full when it’s very cold.This allows for expansion if freezingoccurs, which could damage the tank ifit is completely full. Don’t use engine coolant (antifreeze) inyour windshield washer. It can damageyour washer system and paint.
