How to Reset the Transaxle FluidIndicatorAfter the transaxle fluid has been changed, the transaxlefluid change indicator must be reset. To reset theindicator, do the following:1. Press the INFO (Information) button on the DriverInformation Center (DIC) until TRANS FLUID LIFEis displayed.2. Press and hold the RESET button until 100% isdisplayed. This resets the transaxle fluid changeindicator.The percentage of transaxle fluid life remaining may bechecked at any time by pressing INFO on the DICuntil the TRANS FLUID LIFE message appears.Engine CoolantThe cooling system in your vehicle is filled withDEX-COOL® engine coolant. This coolant is designedto remain in your vehicle for five years or 150,000 miles(240 000 km), whichever occurs first, if you add onlyDEX-COOL® extended life coolant.The following explains your cooling system and how toadd coolant when it is low. If you have a problemwith engine overheating, see Engine Overheating onpage 5-27.A 50/50 mixture of clean, drinkable water andDEX-COOL® coolant will:• Giving freezing protection down to −34°F (−37°C).• Give boiling protection up to 265°F (129°C).• Protect against rust and corrosion.• Help keep the proper engine temperature.• Let the warning lights and gages work as theyshould.Notice: Using coolant other than DEX-COOL® maycause premature engine, heater core or radiatorcorrosion. In addition, the engine coolant mayrequire changing sooner, at 30,000 miles (50 000 km)or 24 months, whichever occurs first. Any repairswould not be covered by your warranty. Always useDEX-COOL ® (silicate-free) coolant in your vehicle.5-24
