DIC Warnings and MessagesThese messages will appear if there is a problemsensed in one of your vehicle’s systems. Vehicles thatare first sold in Canada will have a number aftereach message. This number helps to identify theproblem. You must then press INFO or INFO RESET toclear the display screen for further use. However, besure to take any message that appears on the displayscreen seriously and remember that pressing theINFO or INFO RESET button will only make themessage disappear, not the problem.DIC messages can also be displayed in French,German, Spanish and Japanese. Contact yourGM dealer to have the language display adjusted foryour vehicle.BATTERY NOT CHARGING – 7: This message willappear if the battery is not being charged. Have theelectrical system checked by your GM dealer atyour earliest convenience.BATTERY SAVER ACTIVE – 27: This message isdisplayed when the vehicle has detected that the batteryvoltage is dropping beyond a reasonable point.The battery saver system will start reducing certainfeatures of the vehicle that you may not be ableto notice. At the point that features are disabled, thismessage is displayed. It means that the vehicle is tryingto save the charge in the battery. Turn off unnecessaryaccessories to allow the battery to recharge.BATTERY VOLTAGE HIGH – 8: This message showsthat the electrical charging system is overcharging(more than 16 volts). To avoid being stranded, have theelectrical system checked by your GM dealer. You canreduce the charging overload by using the accessories.Turn on the lamps and radio, set the climate controlon AUTO and the fan speed on HI, and turn therear window defogger on. You can monitor batteryvoltage on the DIC by pressing the INFO button.The normal range is 11.5 to 15.5 volts when the engineis running.3-60
