Black plate (48,1)Cadillac CTS/CTS-V (Europe LHD) Owner Manual - 2013 - CRC - 6/26/123-48 Seats and RestraintsChild Restraint System SizeClasses and FixturesA - ISO/F3: Full-heightforward-facing toddler child restraintsystem.B - ISO/F2: Reduced-heightforward-facing toddler child restraintsystem.B1 - ISO/F2X: Reduced-heightforward-facing toddler child restraintsystem.C - ISO/R3: Full-size rear-facingtoddler child restraint system.D - ISO/R2: Reduced-sizerear-facing toddler child restraintsystem.E - ISO/R1: Rear-facing infant childrestraint system.F - ISO/L1: Left side-facing positioncarrycot.G - ISO/L2: Right side-facingposition carrycot.Lower Anchors andTethers for Children(LATCH System)The LATCH system secures a childrestraint during driving or in a crash.LATCH attachments on the childrestraint are used to attach the childrestraint to the anchors in thevehicle. This system is designed tomake installation of a child restrainteasier.Make sure that a LATCH-compatiblechild restraint is properly installedusing the anchors, or use thevehicle's safety belts to secure therestraint, following the instructionsthat came with that restraint, andalso the instructions in this manual.When installing a child restraint witha top tether, you must also useeither the lower anchors or thesafety belts to properly secure thechild restraint. A child restraint mustnever be installed using only the toptether and anchor.In order to use the LATCH system inyour vehicle, you need a childrestraint that has LATCHattachments. The child restraintmanufacturer will provide you withinstructions on how to use the childrestraint and its attachments. Thefollowing explains how to attach achild restraint with theseattachments in your vehicle.Not all vehicle seating positions orchild restraints have lower anchorsand attachments or top tetheranchors and attachments.
