For a Six-Disc CD PlayerTo turn the radio clock display on or off:1. Turn the radio on.2. Press the MENU button until H is displayed3. Press the pushbutton located under H until theclock and date settings appear.4. Press the pushbutton located under the forwardarrow tab until the menu for default clock anddate settings appear.5. Press the pushbutton located under the currentlydisplayed status of either ON or OFF. The ONdisplay indicates the radio clock display is disabledand the OFF display indicates the radio clock displayis enabled. Press this pushbutton to toggle the radioclock display on or off.If the radio clock display is turned on, the screendisplays Radio Clock ON for 10 seconds, thenreturns to the original clock display menu.If the radio clock display is turned off, thescreen displays Radio Clock OFF for 10 seconds.The menus for clock and date settings are removed,and ON displays as a current status indicating thatthe clock display can be turned on, if desired.Setting the Time and DateFor the Single CD PlayerThis type of radio has a H button for setting the timeand date. To set the time and date:1. Turn the radio on.2. Press H and HR, MIN, MM, DD, YYYY(hour, minute, month, day, and year) displays.3. Press the pushbutton located under any one ofthe tabs that you want to change. Every time thepushbutton is pressed again, the time or the dateif selected, increases by one.• Another way to increase the time or date, is topress the right SEEK arrow or the \ FWDbutton.• To decrease the time or date, press the left SEEKarrow or the s REV button. You can also turnthe a knob, located on the upper right side of theradio faceplate, to adjust the selected setting.3-97
