REMOTE STARTIf your vehicle has this feature, it allows you to turn theremote start off or on. The remote start feature allows youto start the engine from outside of the vehicle using theRemote Keyless Entry (RKE) transmitter. See RemoteVehicle Start on page 2-7 for more information.Press the customization button until REMOTE STARTappears on the DIC display. Press the set/reset buttononce to access the settings for this feature. Then pressthe menu up/down button to scroll through the followingsettings:OFF: The remote start feature will be disabled.ON (default): The remote start feature will be enabled.NO CHANGE: No change will be made to thisfeature. The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.FACTORY SETTINGSThis feature allows you to set all of the customizationfeatures back to their factory default settings.Press the customization button until FACTORYSETTINGS appears on the DIC display. Press theset/reset button once to access the settings for thisfeature. Then press the menu up/down button to scrollthrough the following settings:RESTORE ALL (default): The customization featureswill be set to their factory default settings.DO NOT RESTORE: The customization features willnot be set to their factory default settings.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.Exiting the Feature Settings MenuThe feature settings menu will be exited when any ofthe following occurs:• The vehicle is shifted out of P (Park).• The vehicle is no longer in ON/RUN.• The trip/fuel or vehicle information DIC buttons arepressed.• The end of the feature settings menu is reachedand exited.• A 40 second time period has elapsed with noselection made.3-94
