2. Write down the eight to 12 switch settings fromleft to right as follows:• When a switch is in the up position,write “Left.”• When a switch is in the down position,write “Right.”• If a switch is set between the up and downposition, write “Middle.”The switch settings written down in Step 2now become the button strokes to be enteredinto the Universal Home Remote in Step 4.Be sure to enter the switch settings written downin Step 2, in order from left to right, into theUniversal Home Remote, when completingStep 4.3. From inside your vehicle, first firmly press all threebuttons at the same time for about three seconds.Release the buttons to put the Universal HomeRemote into programming mode.4. The indicator lights will blink slowly. Enter eachswitch setting from Step 2 into your vehicle’sUniversal Home Remote. You will havetwo and one-half minutes to complete Step 4.Now press one button on the Universal HomeRemote for each switch setting as follows:• If you wrote “Left,” press the left button in thevehicle.• If you wrote “Right,” press the right button in thevehicle.• If you wrote “Middle,” press the middle button inthe vehicle.2-60
