System ConfigurationThis feature allows you to reconfigure thenavigation system. If you begin to drive yourvehicle during this procedure, the system will notbe able to adjust the position or direction ofyour vehicle.Touch the System Configuration screen button toview the following choices:Adjust Vehicle Position: To correct the positionof your vehicle on the map or to change vehicleposition, do the following:1. Touch the Adjust Vehicle Position screenbutton. The system will display PositionAdjustment. The vehicle location symbol andthe scroll symbol will appear on the map.2. Use the scroll symbol and the zoom in/zoomout feature to locate the vehicle position onthe map.3. Touch Enter to set the vehicle position. Thesystem will display Position Adjustment andtwo arrows will appear on the map screen.4. Touch the arrows to adjust the direction of thevehicle. As you touch the arrows, you will seethe vehicle symbol direction changing.5. When you have set the vehicle to the correctdirection, touch Enter. Relocation Completewill be displayed.6. Touch Return to exit this menu.Calibrate Vehicle Speed Signal: If there are tirepressure differences or if a spare tire is installed,the navigation system will automatically recalibratethe system. You may also choose to calibrate ityourself by doing the following:1. Touch Start to begin calibration.2. Touch Return to exit this menu.Time to DestinationThis feature allows you to view the estimated timeto travel from your current position to thedestination, and to reset the average speed tofactory default settings. Estimated travel timeis based on calculated route information and thevehicle’s average speed. Touch ON to turnthis feature on, OFF to turn this feature off, orReset to restore vehicle speed default settings.With this feature on, the estimated travel timeto destination will display along with the distanceto destination.244
