Using Cruise Control on HillsHow well your cruise control works on hillsdepends upon your speed, load and the steepnessof the hills. When going up steep hills, youmight have to step on the accelerator pedal tomaintain your speed. When going downhill,you might have to brake or shift to a lower gear tokeep your vehicle’s speed down. Of course,applying the brake turns off the cruise control.Many drivers find this to be too much trouble anddo not use cruise control on steep hills.Ending Cruise ControlThere are two ways to turn off the cruise control:• Step lightly on the brake pedal• Move the cruise control switch to offErasing Speed MemoryTurning off the cruise control or the ignition, willerase your cruise control set speed memory.Adaptive Cruise ControlIf your vehicle has this feature, be sure to readthis entire section before using it.The system operates on a radio frequency subjectto Federal Communications Commission (FCC)Rules and with Industry Canada.This device complies with Part 15 of the FCCRules. Operation is subject to the followingtwo conditions:1. This device may not cause interference.2. This device must accept any interferencereceived, including interference that maycause undesired operation of the device.This device complies with RSS-210 of IndustryCanada. Operation is subject to the following twoconditions:1. This device may not cause interference.2. This device must accept any interferencereceived, including interference that maycause undesired operation of the device.Changes or modifications to this system by otherthan an authorized service facility could voidauthorization to use this equipment.150
