Programming the Power WindowsIf the battery on your vehicle has been recharged,disconnected or is not working, you will need toreprogram each front power window for the express-upfeature to work. Before reprogramming, you will needto replace or recharge your vehicle’s battery.To program each front window, follow these steps:1. With the ignition in ACCESSORY, ON or whenRetained Accessory Power (RAP) is active, closeall doors.2. Press and hold the down arrow on the powerwindow switch until the window has fully opened.3. Press the up arrow on the power window switchuntil the window is fully closed.4. Continue holding up arrow on the switch forapproximately two seconds after the windowis completely closed.The window is now reprogrammed. Repeat the processfor the other front window.Anti-Pinch FeatureIf a hand, an arm or another object is above the middleof the window and is in the path of the window whenthe express-up feature is active, the window will stop atthe obstruction and express-open to a factory presetposition.{CAUTION:Pressing and holding the power windowcontrol will turn off the anti-pinch feature.If this happens, a power window won’t stopif something gets in the way. You or otherscould be injured, and your window could bedamaged. Be careful not to press and hold thepower window control.2-15
