Easy Series Device Specifications and Overview | en 81Bosch Security Systems, Inc. System Reference Guide F01U087835 | 02 | 2008.1010.7 wLSN HubSpecificationsThe wLSN Hub monitors and coordinates two-way communications between the control paneland the detectors.Rotary switches (S1, S2, and S3) configure device operation and enable special diagnosticmodes.An LED on the front provides device status.General OperationRefer to Table 10.5 on Page 81 and Table 10.6 on Page 81 for an overview on wLSN Hub LEDsand switch settings.Table 10.5 wLSN Hub LED DisplaysTable 10.6 wLSN Hub Switch Settings868 MHz ISW-BHB1-WX915 MHz ISW-BHB1-WYWire Gauge 0.14 mm to 1.5 mmWire Length 100 mPower/Voltage 12 VDC nominal, 7 to 14 VDCCurrent Draw 60 mA maximumCompliance EN50131-1 Security Grade 2 Type C, Environmental Class IIOperation LED DisplaySelf Test and Hardware Failure LED flashes twice per sec. This indicates failure. The wLSN Hub doesnot operate.Standard Operation LED on.Configuring Network LED flashes once every 2 sec.RFSS Mode LED flashes once every 4 sec.SwitchesFunction S1 S2 S3Normal Operation 1 0 0RFSS Mode 9 2 0Default Mode 9 8 7
