Menu
Bosch ICP-EZM2 Easy Series System Reference Manual
Also see for ICP-EZM2: Quick start guideInstaller's guideSystem reference guide
                                                                                                                              | |
Contents
|
Easy Series Agency Approvals and Requirements | en 119Bosch Security Systems, Inc. System Reference Guide F01U087835 | 02 | 2008.1012.7 EN50131 RequirementsThe Easy Series Intrusion Control Panel is designed to comply with EN50131-1 Security Grade2, Environmental Class II.To comply with EN50131-1, set these programming items as follows:Installation, Programming, and MaintenanceInstallation: Refer to Section 2.2 Install System Components, page 13.Programming: Refer to Section 5 Programming, page 37.Testing: Refer to Section 8 System Test and Maintenance, page 61.Maintenance: Refer to Section 8 System Test and Maintenance, page 61.Power Supply (AC and Standby Battery)AC Power Supply: Refer to Section 10.2 Control Center, page 75.Standby Battery: Refer to Section 10.2 Control Center, page 75.Automatic InhibitIntruder Alarm and Fault Signal or Message: Set Expert Programming Item Number 131 to a value between 1 and 3.Refer to Section 5.2.2 System Programming Items, page 43for more information.Authorization Code: Set Expert Programming Item Number 892 to a value between 3 and 8.Refer to Section 5.2.8 Control Center Programming Items, page 55for more information.Logical and Physical KeysMinimum Number of Combinations per User:– Passcodes: 15,625 (passcode length must be six digits)– Tokens: 42,000,000,000– Key Fobs: 2,800,000,000,000,000Method Used to Determine Number of Combinations:– Passcodes: Digits 1 to 5 are allowed. For a six-digit passcode, all combinations are allowed.– Tokens: 32 bits. All combinations are allowed.– Key Fobs: 56 bits (48 serialized during manufacturing, 8 remain static)Operating Temperature RangeRefer to Environmental Considerations on Page 72.Control Panel and Control Center Current ConsumptionControl Panel: Refer to Section 10.1 Control Panel, page 72.Control Center: Refer to Section 10.1 Control Panel, page 72.Output Current RatingRefer to Programmable Outputs on Page 72.Programming Item Item Number Setting Section StartingPageProgramming Key Auto Transfer 123 Select Option 0 Page 43Entry Delay 127 Set to 45 sec or lessSwinger Bypass Count 131 Select Option 3Restrict Installer Passcode 142 Select Option 1RPS Automatic Call In Frequency 224 Select Option 0 Page 49Passcode Length 861 Set passcode length to six digits Page 56 |
Related manuals for Bosch ICP-EZM2
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved