4 Repair4.7.1. Replacement of gearbox, axes 1-2 and damper, axis 11573HAC023297-001 Revision: A4.7 Gearboxes4.7.1. Replacement of gearbox, axes 1-2 and damper, axis 1Location of gearbox axes 1-2The axes 1-2 gearbox is located as shown in the figure below. Note that both gearboxes, 1 and2, are a single unit!The damper, axis 1, is shown in the figure in the procedure!A more detailed view of the component and its position may be found in chapter Foldouts inthe Product manual, reference information.xx0200000422Required equipmentA Gearbox, axis 1-2Equipment, etc. Spare part no. Art. no. NoteGearbox, ax. 1-2spare, Std/F3HAC 10467-1 Standard and Foundry versionsIncludes gearbox 3HAC 6603-1Includes all required lubricant!Includes all o-rings and sealingrings!Gearbox, ax. 1-2spare, CR3HAC 10467-3 Clean room versionIncludes gearbox 3HAC 6603-1Includes all required lubricant!Includes all o-rings and sealingrings!Damper, axis 1 3HAC 7527-1Flange sealing 1234 0011-116 2 mlLocTite, 574 3HAC xx For sealing gearbox/baseSealing ring 3HAC 6965-1 Replace only when damaged!
