next 683Examples — To display a list of the commands available at the bootprompt, type the following command:boot> lsls Display a list of all commands and descriptions.help Display help information for each command.autoboot Display the state of, enable, or disable the autoboot option.boot Load and execute an image using the current boot configurationprofile.change Change the current boot configuration profile.create Create a new boot configuration profile.delete Delete the current boot configuration profile.next Select the next boot configuration profile.display Display the current boot configuration profile.dir Display the contents of the specified boot partition.fver Display the version of the loadable image specified bydevice:filename.version Display HW and Bootstrap/Bootloader version information.reset Reset the system.test Display the state of, enable, or disable the tests option.diag Access the diagnostic command CLI.See Also help on page 681next Activates and displays the boot profile in the next boot profile slot. (Forinformation about boot profiles, see display on page 678.)Syntax — nextDefaults — None.Access — Boot prompt.History —Introduced in MSS Version 3.0.Usage — A WX switch contains 4 boot profile slots, numbered0 through 3. This command activates the boot profile in the next slot, inascending numerical order. If the currently active slot is 3, the commandactivates the boot profile in slot 0.
