set {ap | dap} radio antennatype 353See Also display {ap | dap} config on page 296set {ap | dap} radioantennatypeSets the model number for an external antenna.Syntax — set {ap port-list | dap dap-num} radio {1|2} antennatype{ANT1060 | ANT1120 | ANT1180 |ANT5060 | ANT5120 | ANT5180 |ANT-1360-OUT | ANT-5360-OUT |ANT-5120-OUT | internal} ap port-list — List of ports connected to the MAP access points onwhich to set the channel. dap dap-num — Number of a Distributed MAP on which to set thechannel. radio 1 — Radio 1 of the MAP. radio 2 — Radio 2 of the MAP. (This option does not apply tosingle-radio models.) antennatype {ANT1060 | ANT1120 | ANT1180 | internal} —802.11b/g external antenna models: ANT1060 — 60° 802.11b/g antenna ANT1120 — 120° 802.11b/g antenna ANT1180 — 180° 802.11b/g antenna internal — uses the internal antenna instead antennatype {ANT5060 | ANT5120 | ANT5180 | internal} —802.11a external antenna models: ANT5060 — 60° 802.11a antenna ANT5120 — 120° 802.11a antenna ANT5180 — 180° 802.11a antenna internal — uses the internal antenna instead antennatype{ANT-1360-OUT | ANT5360-OUT | ANT5060 | ANT5120-OUT |internal} — 802.11a external antenna models: ANT1360-OUT — 360° 802.11b/g antenna ANT5360-OUT — 360° 802.11a antenna
