3Com WX4400 Command Reference Manual

Also see for 3CRWX120695A: User guide User guide Command reference Configuration guide Installation and Basic Configuration Guide

Contents

3Com WX4400 Command Reference Manual Manual pdf 405 page image

set service-profile idle-client-probing 405set service-profileidle-client-probingDisables or reenables periodic keepalives from MAP radios to clients on aservice profile’s SSID. When idle-client probing is enabled, the MAP radiosends a unicast null-data frame to each client every 10 seconds. Normally,a client that is still active sends an Ack in reply to the keepalive.If a client does not send any data or respond to any keepalives before theuser idle timeout expires, MSS changes the client’s session to theDisassociated state.Syntax — set service-profile name idle-client-probing{enable | disable} name — Service profile name. enable — Enables keepalives. disable — Disables keepalives.Defaults — Idle-client probing is enabled by default.Access — Enabled.History —Introduced in MSS Version 4.2.Usage — The length of time a client can remain idle (unresponsive toidle-client probes) is specified by the user-idle-timeout command.Examples — The following command disables idle-client keepalives onservice profile sp1:WX4400# set service-profile sp1 idle-client-probing disablesuccess: change accepted.See Also set service-profile user-idle-timeout on page 426 display service-profile on page 330