set dot1x wep-rekey 563Examples — Type the following command to set the number of secondsbefore the WX switch retransmits an EAPoL packet to 300:WX4400# set dot1x tx-period 300success: dot1x tx-period set to 300.See Also display dot1x on page 551 clear dot1x tx-period on page 551set dot1xwep-rekeyEnables or disables Wired Equivalency Privacy (WEP) rekeying forbroadcast and multicast encryption keys.Syntax — set dot1X wep-rekey {enable | disable} enable — Causes the broadcast and multicast keys for WEP to berotated at an interval set by the set dot1x wep-rekey-period for eachradio, associated VLAN, and encryption type. The WX generates thenew broadcast and multicast keys and pushes the keys to the clientsvia EAPoL key messages. disable — WEP broadcast and multicast keys are never rotated.Defaults — WEP key rotation is enabled, by default.Access — Enabled.History —Introduced in MSS Version 3.0.Usage — Reauthentication is not required for WEP key rotation to takeplace. Broadcast and multicast keys are always rotated at the same time,so all members of a given radio, VLAN, or encryption type receive thenew keys at the same time.Examples — Type the following command to disable WEP key rotation:WX4400# set dot1x wep-rekey disablesuccess: wep rekeying disabledSee Also display dot1x on page 551 set dot1x wep-rekey-period on page 564
