Installation ManualH3C S7500 Series Ethernet Switches Chapter 5 System Commissioning5-6Caution:Before powering on the switch, locate the position of the power switch for theequipment room where you will operate so that you can switch off the power supplypromptly in case of any accident5.2.2 Power-onz Turn on the power to the system.z Turn on the power switch on the system.5.2.3 Check after Power-on (Recommended)After powering on the switch, check that:z The cooling system works normally. You can hear the fans rotate and feel airflowsout of the vent.z The system LEDs on the SRPU work normally.After that, make corresponding configurations.5.2.4 Startup ProcessAs the switch is started, the following information will be output on the configurationterminal:Note:The following information may vary with switch models.******************************************* ** H3C S7506 BOOTROM, Version 530 ** *******************************************Copyright(c) 2004-2007 Hangzhou H3C Tech. Co., Ltd.Creation date : Apr 20 2007, 14:48:52CPU type : MPC8245CPU Clock Speed : 300MhzBUS Clock Speed : 33Mhz
