1-9SNMPv3display snmp-agent trap-listSyntaxdisplay snmp-agent trap-listViewAny viewParametersNoneDescriptionUse the display snmp-agent trap-list command to display the modules that can generate traps andwhether the sending of traps is enabled on the modules.If a module contains multiple submodules, the trap function of the entire module is displayed as enabledas long as the trap function of any of the submodules is enabled.Related commands: snmp-agent trap enable.Examples# Display the modules that can generate traps and whether the trap function is enabled on the modules. display snmp-agent trap-listconfiguration trap enableflash trap enableospf trap enablestandard trap enablesystem trap enablevrrp trap enableEnable traps :6; Disable traps 0In the above output information, enable indicates that traps are allowed to be generated on the module,and disable indicates that traps are not allowed to be generated on the module.By default, the modules that can generate traps are allowed to generate traps. If you do not need trapsof some modules, you can use the undo snmp-agent trap enable command to disable the trapfunction of the specific modules.display snmp-agent usm-userSyntaxdisplay snmp-agent usm-user [ engineid engineid | username user-name | group group-name ]*ViewAny view
