1-12ftm fabric-vlanSyntaxftm fabric-vlan vlan-idundo ftm fabric-vlanViewSystem viewParametersvlan-id: ID of the XRN fabric VLAN, in the range of 2 to 4094. The VLAN you specified must be the onethat has not been created manually.DescriptionUse the ftm fabric-vlan command to specify the VLAN that the switch uses for XRN fabric.Use the undo ftm fabric-vlan command to restore the default VLAN.By default, the number of the XRN Fabric VLAN is 4093.In an XRN fabric, the VLAN is used to synchronize configurations and transmit XRN data amongdevices, avoiding packets being sent to non fabric portsYou need to specify the XRN fabric VLAN before the XRN fabric is established. Because after the fabricis established, the VLAN cannot be modified.Examples# Specify VLAN 2 of the switch as an XRN fabric VLAN. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] ftm fabric-vlan 2xrn-fabric authentication-modeSyntaxxrn-fabric authentication-mode { simple password | md5 key }undo xrn-fabric authentication-modeViewSystem viewParameterssimple: Uses simple authentication mode.password: Password for fabric authentication, a string of 1 to 16 characters.md5: Uses MD5 encryption authentication mode.key: MD5 key, a string of 1 to 16 characters.
