2-10ViewInterface viewParametersseconds: Maximum response time in seconds in the IGMP general query messages, ranging from 1 to25.DescriptionUse the igmp max-response-time command to configure the maximum response time carried in theIGMP general query messages.Use the undo igmp max-response-time command to restore the default.The maximum response time is 10 seconds by default.Related commands: display igmp interface.Examples# On VLAN-interface 10, configure the maximum response time carried in IGMP general querymessages to 8 seconds. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] interface Vlan-interface 10[Sysname-Vlan-interface10] igmp max-response-time 8igmp proxySyntaxigmp proxy interface-type interface-numberundo igmp proxyViewInterface viewParametersinterface-type interface-number: Specifies the interface for which the current interface will act as theIGMP proxy interface.DescriptionUse the igmp proxy command to configure the current interface as the IGMP proxy interface foranother interface on the Layer 3 switch.Use the undo igmp proxy command to restore the default.No interface is configured as the IGMP proxy interface for another.Before configuring the igmp proxy command on an interface, you must enable PIM on it. One interfacecannot serve as the IGMP proxy interface for two or more interfaces.If the IGMP proxy feature is configured repeatedly on the same interface, the last configuration takeseffect.
