3Com 5500-EI PWR Reference Manual

Also see for 5500-EI Series: Product guide Datasheet Product guide Datasheet Configuration guide

Contents

3Com 5500-EI PWR Reference Manual Manual pdf 1244 page image

1-14Field DescriptionNumber of sent optional TLV Number of the optional TLVs contained in anLLDPDU sent through the portNumber of received unknown TLV Number of the unknown TLVs contained in a receivedLLDPDUdisplay lldp tlv-configSyntaxdisplay lldp tlv-config [ interface interface-type interface-number ]ViewAny viewParametersinterface interface-type interface-number: Specifies a port by its type and number.DescriptionUse the display lldp tlv-config command to display the TLVs that are currently sent through a port.If no port is specified, this command displays all the TLVs that are currently sent through all the ports.Examples# Display all the TLVs that are currently sent through all the ports. display lldp tlv-configLLDP tlv-config of port 1 [Ethernet1/0/1] :NAME STATUS DEFAULTBasic optional TLV :Port Description TLV YES YESSystem Name TLV YES YESSystem Description TLV YES YESSystem Capabilities TLV YES YESManagement Address TLV YES YESIEEE 802.1 extend TLV :Port VLAN ID TLV YES YESPort And Protocol VLAN ID TLV YES YESVLAN Name TLV YES YESIEEE 802.3 extend TLV :MAC-Physic TLV YES YESPower via MDI TLV YES YESLink Aggregation TLV YES YESMaximum Frame Size TLV YES YESLLDP-MED extend TLV :