Xorcom XP0100 User Manual

Also see for XP0100: Quick reference Quick installation

Contents

Xorcom XP0100 User Manual Manual pdf 64 page image

XP0100 Enterprise IP Phone Using the Advanced Phone FunctionsXorcom Ltd. 57 www.xorcom.comTo configure Action URL via web user interface:1) Click on Phone->Action URL.2) Enter a HTTP URL in the proper field.3) Click Confirm to save the change.Note:Action URL is allowed to be HTTPS URL. Contact with your system administratorfor more information.The following table provides variables can be used in the Action URL:Parameter Descriptions$mac MAC Address of the phone$ip IP Address of the phone$model Device model name of the phone$firmware Firmware version of the phone$active_url SIP URI of the active user$active_user User part of the SIP URI of the active user$active_host Host part of the SIP URI of the active user$local SIP URI of the caller$remote SIP URI of the callee$display_local Display name of the caller$display_remote Display name of the callee$call_id Call id$duration Call duration$callDirection Indication of the call as sender or recipientAction URIOpposite to Action URL, Action URI allows the phone to interact with web serverapplications by receiving and handling HTTP GET requests. To simply verify this feature,you can enter the following string into the browser address bar and press Enter:http://192.168.10.5/cgi-bin/ConfigManApp.com?key=DNDOnThen the phone with the IP Address of 192.168.10.5, if existed, will turn on DND.Be aware that only predefined phone events are supported by the phone.The following table provides the predefined phone events:Phone Events Descriptionskey=OK Press the √ keykey=SPEAKER Press the Speaker keykey=F_TRANSFER Press the Transfer keykey=VOLUME_UP Increase the volumekey=VOLUME_DOWN Reduce the volume