Xorcom XP0100 User Manual

Also see for XP0100: Quick reference Quick installation

Contents

Xorcom XP0100 User Manual Manual pdf 62 page image

XP0100 Enterprise IP Phone Using the Advanced Phone FunctionsXorcom Ltd. 55 www.xorcom.comURLIf the key is configured as URL, then pressing this key, you can send HTTP requests toa web server.To assign the key as URL via web user interface:1) Click on DSS Keys->Memory Keys.2) Select the desired DSS key.3) Select URL from the pull-down list of Type.4) Enter the number you want to set as URL in the Value field.5) Click Confirm to save the change.SNMPSimple Network Management Protocol (SNMP) is an Internet-standard protocol formanaging devices in IP networks. It is used mostly in network management systems tomonitor network-attached devices for conditions that warrant administrative attention.SNMP exposes management data in the form of variables on the managed systems,which describe the system configuration. These variables can then be queried (andsometimes set) by managing applications. For further information, you can refer tohttp://en.wikipedia.org/wiki/SNMP.By default, the phone does not accept SNMP requests. This is necessary because SNMPmight introduce unwanted security threats. The phone only supports the GET request ofSNMP. SET or other requests are not supported. To enable SNMP, you must specify whatIP addressed may send SNMP requests to the phone.To configure SNMP via web user interface:1) Click on Network -> Advanced.2) Scroll to SNMP field and select Enabled from the pull-down list of Enable.3) Enter the port and trusted address in the Port and Trusted Address fields.4) Click Confirm to save the change.Note:1. You may use several trusted IP addresses separated by space.For example, “192.168.3.10 192.168.3.78” will allow accesses from the two listedIP addresses.2. Wildcards are not supported here.