Xorcom XP0100 User Manual

Also see for XP0100: Quick reference Quick installation

Contents

Xorcom XP0100 User Manual Manual pdf 46 page image

XP0100 Enterprise IP Phone Using the Advanced Phone FunctionsXorcom Ltd. 39 www.xorcom.comaccounts, Advance settings of Network, Reset to Factory, and other advance phonesettingsAdministrator/User PasswordAdministrator mode grants unlimited access to the phone configuration on both weband phone user interface. The administrator/user password is used to access: Web user interface. The advanced settings of the phone such as Account, Reset to Factory, andAdvanced Settings via the phone interface.The default administrator password is admin. Meanwhile the user name for Web userinterface access is admin.To change the administrator password via phone user interface:1) Press ->Settings->Advanced.2) Enter the password required, scroll to Set Password and then press .3) Enter the Current PWD, New PWD and Confirm PWD, press abc soft key tochange the input method.4) Press to save the change or to cancel.To change the administrator password via web user interface:1. Click on Security.2. Select admin from the pull-down list of User Type, enter the Current Password,New Password and Confirm password.3. Click Confirm to save the change.To change the user password, refer to the steps introduced above.RebootYou should reboot the phone when you are challenged, e.g. after applying changes tothe phone configuration.To reboot the phone via web user interface:1) Click on Phone->Upgrade.2) Click Reboot to reboot the phone.Note:Please do not power off during reboot, or it will cause the flash memory error.