Xorcom XP0100 User Manual

Also see for XP0100: Quick reference Quick installation

Contents

Xorcom XP0100 User Manual Manual pdf 45 page image

XP0100 Enterprise IP Phone Using the Advanced Phone FunctionsXorcom Ltd. 38 www.xorcom.com2) Scroll to LLDP field, and then select Enabled from the pull-down list of Active.3) Enter the corresponding packet interval in the Packet Interval field.4) Click Confirm to save the changeHTTPSThis IP phone can support HTTPS (Hypertext Transfer Protocol over Secure SocketLayer). Adding SSL layer under HTTP, in short, it is a security version of HTTP. Users canset this transmission mode via web page.To configure HTTPS settings via phone user interface:1) Press ->Settings->Advanced.2) Enter the password required, scroll to Network and then press .3) Scroll to Web Type and then press .4) Press Left/Right navigation key to select the transmission mode.5) Press save the change or to cancel.To configure HTTPS settings via web user interface:1) Click on Network->Advanced2) Scroll to WebServer field, and then select the desired transmission mode from thepull-down list of Type.3) Click Confirm to save the change.Note:1. Contact your system administrator for more information about the HTTPS.2. IP phone also support Internet Protocol Version 6.Maintenance TasksAdministrator ModeThe phone allows two modes to configure the phone: User Mode Administrator ModeAdministrator mode grants unlimited access to the phone configuration on both Weband Phone interface. User Mode cannot set the following options: Advance settings of