Xorcom XP0100 User Manual

Also see for XP0100: Quick reference Quick installation

Contents

Xorcom XP0100 User Manual Manual pdf 13 page image

XP0100 Enterprise IP Phone Getting StartedXorcom Ltd. 6 www.xorcom.comAccount SettingsThe phone attempts to register to the SIP server using the account/registrar dataprovided by the automatic or manual initialization.Click on Account->Basic, you will find the following parameters:Field DescriptionRegister Status It shows the register status of the phone.Account Active You can select Enabled/Disabled to set the account respectivelyLabel It is showed on the LCD for users to identify the account.Display Name It is showed as Caller ID when making a phone call.Register Name It is authenticated ID for authentication, provided by ITSP.User Name User account information, provided by VoIP service provider.Password It is provided by ITSP for registration.SIP Server Server for registration, provided by ITSP.When all accounts register fail, phone will display "No Service" on the idle screen.When the phone reboot, it will register automatically. If many phones register at thesame time, this will affect the server, users can set the register power up time so thatthe phone will random register automatically within the set time.To configure the power up time via web user interface:1) Click on Network->Advanced.2) Scroll to Registration random field, and then enter the time in the Registrationrandom field.3) Click Confirm to save the change.Note:Should the IP PBX (SIP registrar) require an authentication, you will be prompted toenter the correct password. Make sure you are using the appropriate input method orenter the password via web user interface.Configuring via keypadNetwork Settings: Press , and then press Settings-> Advanced-> Network->WAN Port/PC Port /VLAN/Web Type/802.1x Settings to configure the networksettings.Account Settings: Press , and then press Settings->Advanced->Accounts toconfigure the account settings.Refer to Configuring via Web Page for the parameter details.