WorkCentre™ 5735/5740/5745/5755/5765/5775/5790System Administrator Guide3065. Click on the [Apply] button.Note: All Saved Jobs are stored as encrypted files if encryption of user data is enabled. Encryptionensures that third parties cannot read, print, scan and e-mail these files. You can enable or disableencryption of user data on the User Data Encryption page. Refer to User Data Encryption onpage 173.Enable Reprint Saved Jobs in your Print DriverEnable Save Job for ReprintAt Your Device:Note: To configure this feature or these settings access the Tools pathway as a SystemAdministrator. For details, refer to Access Tools Pathway as a System Administrator on page 18.1. From the Tools pathway, touch [Service Settings].2. Select [Optional Services].3. Scroll down using the down arrow button and select [Save Job For Reprint].4. The Save Job for Reprint screen displays, select one of the following:• Disable and Delete Jobs - this option will disable the feature and delete the user folders andit contents.• Disable and Keep Jobs - this option will disable the feature, but will not delete the user folderor its content.• Enable - this option enables the feature, and does not require a system restart to activate thefeature.5. Touch [Save] to return to the Optional Services screen.Windows Operating Systems MAC Operating Systems1. At your Workstation, open the Printers Folder.• For Windows 2000/2003 - From the [Start]menu, select [Settings] then [Printers].• For Windows XP - From the [Start] menu, select[Printers and Faxes].• For Windows Vista - From the [Start] menu,(select [Control Panel]) then select [Printersand Faxes].2. Right-click on the Xerox WorkCentre Print Driver.3. Select [Properties].4. Click on the [Configuration] tab.5. Click on the [Installable Options] button.6. Ensure [Installed] is selected from the [JobStorage] drop-down menu.7. Click on the [OK] button to close the InstallableOptions screen.8. Click on the [OK] button to close the Propertiesscreen.1. At your Mac Workstation, open the [PrinterSetup Utility].2. Select the Xerox printer and click on the [ShowInfo] button.3. Click on [Installable Options].4. Select [Installed] from the [Job Storage] drop-down menu.5. Click on the [Apply Changes] button.6. Close the Printer Info box.
