Xerox WorkCentre SeriesWorkCentre™ 5735/5740/5745/5755/5765/5775/5790System Administrator Guide10Xerox WorkCentre SeriesYour device is not simply a conventional copier, it is a digital device capable of copying, faxing, printingand scanning, dependent on your model and configuration.There are two configurations available:• WorkCentre Copier/Printer - a multi-functional digital device capable of copying, printing, faxing(optional), e-mailing and network scanning (optional).• WorkCentre Copier/Printer/Scanner - an advanced multi-functional device offering a highspecification of features and functions. This model is capable of copying, printing, scanning, e-mailing and faxing (optional).Each model has seven configurations available which provide either 35, 40, 45, 55, 65, 75, or 90copies/prints a minute. All configurations are fully upgradeable so as to meet any future requirementsyou may have.The following are supplied as standard:• Document Feeder• Paper Trays 1 and 2 - fully adjustable and can be used for media sizes 5.5x8.5” to 11x17” (A5to A3).• Paper Trays 3 and 4 - are high capacity paper trays used for media size 8.5x11” (A4).• Bypass Tray - used for non-standard printing media.The following are optional hardware, which are available for your device:• Tray 5 - a high capacity paper tray used for media size 8.5x11” (A4). Optional kits areavailable to accommodate 11x17” or 8.5x11” (A3 or A4) short edge feed media.• Tray 6 (Inserter) - a paper tray for use with the High Volume Finisher. It is used to insert pre-printed sheets into copy sets.• High Volume Finisher (HVF) - a finisher which can collate, offset, stack and staple youroutput. Booklet Maker, Trifold, Hole Punch and Post Process Inserter (PPI) kits can be installedwith this finisher.• Booklet Maker and Trifolder - these are devices which can be installed with HVF to stapleand fold booklets or leaflets.• Convenience Stapler - this provides manual stapling of up to 50 sheets. The ConvenienceShelf must also be fitted.• Offset Catch Tray - this delivers output collated or uncollated, each set or stack will be offsetfrom the previous to enable easy separation.• Basic Office Finisher - this device stacks, collates, staples and offsets your output.• Office Finisher - this device stacks, collates, staples and offsets your output. Hole punch kitsare also available for this finisher.
