Xerox WorkCentre 5735 System Administrator Manual

Also see for WORKCENTRE 5735: Installation guide Information guide User guide Datasheet Getting started guide

Contents

Xerox WorkCentre 5735 System Administrator Manual Manual pdf 146 page image

Windows 2000 ProfessionalWorkCentre™ 5735/5740/5745/5755/5765/5775/5790System Administrator Guide1467. Enter the IP Address of the printer.8. Enter a name for the print queue and click [OK].9. You will be prompted for a Print Driver. Select [Have Disk] and browse to the location of your PrintDriver.10. Select the [.INF] file then click on [Open].11. The wizard will return you to the previous dialog. Verify the path and file name are correct andclick on [OK].12. Select the model that corresponds to your device and click on [Next].13. The Name your Printer screen appears. Enter a printer name. Select [Yes] if you wish to make thisthe default printer, then click on [Next].14. The Printer Sharing screen appears. If you will be sharing this printer with other clients select the[Share As] button and enter a share name. Click on [Next].15. Enter a location and comment (optional).16. Select [Yes] to print a test page and verify that it prints at the device. Click [Next].17. Click on [Finish].Configure the Print Driver1. From the [Start] menu, select [Settings] and then [Printers].2. Right-click on the printer icon and select [Properties].3. Click on the [Configuration] tab.4. Change the settings you wish to set for the printer.5. Click on [OK].For further information on Configuring the Print Driver and Installation, refer to the Print Drivers Guidefor Windows CD.