Xerox DocuPrint 180 IPS Installation Planning Manual

Also see for DocuPrint 180 IPS Series: Message guide User guide Installation planning guide Reference guide Troubleshooting guide

Contents

Xerox DocuPrint 180 IPS Installation Planning Manual Manual pdf 172 page image

DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENTE-30 XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE3. Define the printer to PSF/2Follow these steps to define the IPS printer to PSF/2.1. Select the Control Panel icon from the PSF/2 folder (located onthe OS/2 Desktop).2. From the Control Panel Main window, click on the Profilepulldown menu.3. Select New from the Profile menu. The New device dialogwindow appears.4. Enter all your new device parameter values in the fields thatappear on this window.5. Select the Settings button in the “Attachment Type” frame. TheTCP/IP Settings window appears.6. Enter the IP Address, TCP/IP Port Number, Form Definition,and Connect Timeout values on the TCP/IP Settings window.The table below gives defaults, descriptions, and recommendedvalues for the parameters accessible from the New Device andTCP/IP Settings windows.Table E-24.Parameters for PSF/2 device definitionItemdescription Default Source of value Acceptable range Comments Your valueDevice Name None Your choice Arbitrary, but specialconsiderations if itmatches an OS/2device nameYou will refer to theprinter by this name inlater PSF/2 activities.If you use LPT1, LPT2,or LPT3 (and they arenot already beingotherwise used) youare able to use the OS/2 commands PRINT,TYPE, and COPY withthe IPS printer.DeviceDescriptionNone Your choice Appears in ControlPanel Main window.Attachment type Required If TCP/IP does notappear an availableattachment type, eitherTCP/IP for OS/2 or theTCP/IP AttachmentSupport in PSF/2 hasnot been installed.(Refer to theappropriate IBMinstallation guide fordetails.)TCP/IP