Xerox DocuPrint 180 IPS Installation Planning Manual

Also see for DocuPrint 180 IPS Series: Message guide User guide Installation planning guide Reference guide Troubleshooting guide

Contents

Xerox DocuPrint 180 IPS Installation Planning Manual Manual pdf 15 page image

PRODUCT OVERVIEWXEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 1-3Figure 1-2. 96/4635/180 IPS: TCP/IP configuration1 Host system (PC or mainframe)2 Token Ring or Ethernet network connection3 Sun workstation controller4 Printer interface cable (DCIM2)5 96, 4635, or 180 IPS printerFor information on the various IPS printer configuration options, referto the “Printer components and options” chapter of this guide.Throughput speed Data is printed at high speeds:• 96 and 96 MICR IPS: Up to 96 pages per minute• 4635 and 4635 MICR IPS: Up to 135 pages per minute.• 180 and 180 MICR IPS: Up to 180 pages per minuteMonthly print volume The monthly print volumes for these systems are:• 96 and 96 MICR IPS: Up to 3 million pages• 4635 and 4635 MICR IPS: Up to 4 million pages• 180 and 180 MICR IPS: Up to 6 million pagesSystem componentsThe IPS systems consist of the following major components:• Printer controller — The printer controller (also called thesystem controller) accepts IPDS data (plus PostScript and PCLdata with the Dual Mode option) from the host, processes thedata, and sends the data to the printer engine using the IPSoperating system. The controller provides the printer with printdata and commands, and receives status information from theprinter.• Printer — The printer, also called the Image Output Terminal(IOT), accepts formatted pages of data from the printercontroller and performs the imaging and printing of documents.The printer also provides paper stacking, collating, and optionalfinishing capabilities you enable using the IPS applicationsoftware accessed through the graphical user interface.