DocuMate 3115User’s Guide863. Click the VRS Settings tab to see the new VRS settings.4. Choose the Kofax VRS options for the scan configuration.5. Click the drop-down arrow to choose the type of VRS settings to use for the new scanconfiguration. The options are:• Do not use VRS processing—Scanning will not use the VRS processing.• Default settings—Automatically selects the options your scanner can use with any scanmode (Black&White, Grayscale, and Color).The Basic Features are:• AutoCrop—Determines the size of the item being scanned and produces an image of thesame size. For example, if you scan a postcard-sized document, the resulting image will be thesize of the postcard. This option overrides the page size setting.• AutoDeskew—Detects the edges of a document and determines if they are straight orskewed. If the page is skewed, the image will be adjusted so it is straightened. However, if thepage is fed through the scanner at too great an angle, the image may not straightencorrectly. In that case, re-scan the page using the paper guides to feed the paper in straight.• AutoBrightness—Sets the brightness to achieve the best balance between the document’sbackground, foreground, and highlighted areas. For grayscale images, lighter areas becomewhiter and darker areas become blacker. AutoBrightness is not available for Color scanconfigurations.• Edge Cleanup—Sometimes a scan image will have a thin black outline around its edges. ThisVRS option replaces those black outlines with white. Edge Cleanup only applies if AutoCropand AutoDeskew are selected so the software can determine where the edges are located.Therefore, selecting Edge Cleanup will also select AutoCrop and AutoDeskew. Edge Cleanup isonly available for Black&White scan configurations.• DeSpeckle—Speckles are small spots on an image that the scanner interpreted as a validpart of the document. For example, an irregularity in the paper, or a small wrinkle, or theholes where a staple was removed may show up as speckles on the scanned image. TheDeSpeckle option identifies these spots and removes them. DeSpeckle is only available forBlack&White scan configurations.If you upgrade your scanner’s VRS software to the VRS Professional version, the ProfessionalFeatures shown at the bottom of the window become active.
