DocuMate 3115User’s Guide50Configure Before ScanYou can set up the scanner so that, when you press a button or click it on the Button Panel, a differentscanning interface opens before the scanning starts. To set up the scanner for this capability, you selectConfigure Before Scan from the scan configuration list.Choosing Configure Before Scan simply opens either the TWAIN or WIA scanning interface when youpress a button. You can then use the interface to change the Resolution, Scan Mode, and othersettings. When you scan, the scanned image will still be sent as the file type and to the sameDestination Application already selected in the One Touch Properties window for that button.To set Configure Before Scan1. Open the One Touch Properties window.2. Select the scan configuration Configure Before Scan.3. Right-click on Configure Before Scan and choose an interface to use for configuring beforescanning.TWAIN—The TWAIN Interface opens for you to make changes prior to scanning. See Scanningfrom TWAIN on page 91.WIA—The Windows Image Acquisition (WIA) Interface opens for you to make changes prior toscanning. See Scanning from WIA on page 97.4. Click OK or Apply on the One Touch Properties window.To Scan Using Configure Before Scan1. Click the button you set up to use Configure Before Scan.2. The TWAIN Interface opens.3. Choose your scan settings, such as the Picture Type of Color, Grayscale or Black & White,Resolution in DPI, and Page Size.Select then right-click on ConfigureBefore Scan toget the menu,and choose theinterface to usefor scanning.
