DocuMate 3115User’s Guide39Configuring the One Touch ButtonsWhen you installed the scanner, the software configured each One Touch button with appropriatesettings consisting of: a Destination Application, a Scan Configuration, and a File Format.1. Click on the One Touch icon.2. Right-click a button on the One Touch Button Panel.3. The One Touch Properties window opens.The One Touch Properties window will also open when you press, hold down for 3 seconds, and releasethe Simplex or Duplex button.Changing a Button setting1. Click on an application name in the Select Destination list.2. Select a file format in the Select Format panel.3. Select a scanning configuration in the Select Configuration list.4. Click on OK to save the changes.5. Place a page in the scanner.6. Click on the button that you made the changes for.7. The scanner starts scanning and sends the image to the application, with the file format andscanning configuration you specified.NOTE: The next section contains detailed information on making changes to the One Touch Propertieswindow.NOTE: Some of the options on the One Touch Properties Window are “grayed out” and are notavailable, these options are not appropriate for your scanner model.Right-click on a button (for example, button1) and the Properties window opens for thatbutton.One Touch Icon
